GitHub - binance-chain/tss-lib: Threshold Signature Scheme ...

Stakenet (XSN) - A DEX with interchain capabilities (BTC-ETH), Huge Potential [Full Writeup]

Preface
Full disclosure here; I am heavily invested in this. I have picked up some real gems from here and was only in the position to buy so much of this because of you guys so I thought it was time to give back. I only invest in Utility Coins. These are coins that actually DO something, and provide new/build upon the crypto infrastructure to work towards the end goal that Bitcoin itself set out to achieve(financial independence from the fiat banking system). This way, I avoid 99% of the scams in crypto that are functionless vapourware, and if you only invest in things that have strong fundamentals in the long term you are much more likely to make money.
Introduction
Stakenet is a Lightning Network-ready open-source platform for decentralized applications with its native cryptocurrency – XSN. It is powered by a Proof of Stake blockchain with trustless cold staking and Masternodes. Its use case is to provide a highly secure cross-chain infrastructure for these decentralized applications, where individuals can easily operate with any blockchain simply by using Stakenet and its native currency XSN.
Ok... but what does it actually do and solve?
The moonshot here is the DEX (Decentralised Exchange) that they are building. This is a lightning-network DEX with interchain capabilities. That means you could trade BTC directly for ETH; securely, instantly, cheaply and privately.
Right now, most crypto is traded to and from Centralised Exchanges like Binance. To buy and sell on these exchanges, you have to send your crypto wallets on that exchange. That means the exchanges have your private keys, and they have control over your funds. When you use a centralised exchange, you are no longer in control of your assets, and depend on the trustworthiness of middlemen. We have in the past of course seen infamous exit scams by centralised exchanges like Mt. Gox.
The alternative? Decentralised Exchanges. DEX's have no central authority and most importantly, your private keys(your crypto) never leavesYOUR possession and are never in anyone else's possession. So you can trade peer-to-peer without any of the drawbacks of Centralised Exchanges.
The problem is that this technology has not been perfected yet, and the DEX's that we have available to us now are not providing cheap, private, quick trading on a decentralised medium because of their technological inadequacies. Take Uniswap for example. This DEX accounts for over 60% of all DEX volume and facilitates trading of ERC-20 tokens, over the Ethereum blockchain. The problem? Because of the huge amount of transaction that are occurring over the Ethereum network, this has lead to congestion(too many transaction for the network to handle at one time) so the fees have increased dramatically. Another big problem? It's only for Ethereum. You cant for example, Buy LINK with BTC. You must use ETH.
The solution? Layer 2 protocols. These are layers built ON TOP of existing blockchains, that are designed to solve the transaction and scaling difficulties that crypto as a whole is facing today(and ultimately stopping mass adoption) The developers at Stakenet have seen the big picture, and have decided to implement the lightning network(a layer 2 protocol) into its DEX from the ground up. This will facilitate the functionalities of a DEX without any of the drawbacks of the CEX's and the DEX's we have today.
Heres someone much more qualified than me, Andreas Antonopoulos, to explain this
https://streamable.com/kzpimj
'Once we have efficient, well designed DEX's on layer 2, there wont even be any DEX's on layer 1'
Progress
The Stakenet team were the first to envision this grand solution and have been working on it since its conception in June 2019. They have been making steady progress ever since and right now, the DEX is in an open beta stage where rigorous testing is constant by themselves and the public. For a project of this scale, stress testing is paramount. If the product were to launch with any bugs/errors that would result in the loss of a users funds, this would obviously be very damaging to Stakenet's reputation. So I believe that the developers conservative approach is wise.
As of now the only pairs tradeable on the DEX are XSN/BTC and LTC/BTC. The DEX has only just launched as a public beta and is not in its full public release stage yet. As development moves forward more lightning network and atomic swap compatible coins will be added to the DEX, and of course, the team are hard at work on Raiden Integration - this will allow ETH and tokens on the Ethereum blockchain to be traded on the DEX between separate blockchains(instantly, cheaply, privately) This is where Stakenet enters top 50 territory on CMC if successful and is the true value here. Raiden Integration is well underway is being tested in a closed public group on Linux.
The full public DEX with Raiden Integration is expected to release by the end of the year. Given the state of development so far and the rate of progress, this seems realistic.
Tokenomics
2.6 Metrics overview (from whitepaper)
XSN is slightly inflationary, much like ETH as this is necessary for the economy to be adopted and work in the long term. There is however a deflationary mechanism in place - all trading fees on the DEX get converted to XSN and 10% of these fees are burned. This puts constant buying pressure on XSN and acts as a deflationary mechanism. XSN has inherent value because it makes up the infrastructure that the DEX will run off and as such Masternode operators and Stakers will see the fee's from the DEX.
Conclusion
We can clearly see that a layer 2 DEX is the future of crypto currency trading. It will facilitate secure, cheap, instant and private trading across all coins with lightning capabilities, thus solving the scaling and transaction issues that are holding back crypto today. I dont need to tell you the implications of this, and what it means for crypto as a whole. If Stakenet can launch a layer 2 DEX with Raiden Integration, It will become the primary DEX in terms of volume.
Stakenet DEX will most likely be the first layer 2 DEX(first mover advantage) and its blockchain is the infrastructure that will host this DEX and subsequently receive it's trading fee's. It is not difficult to envision a time in the next year when Stakenet DEX is functional and hosting hundreds of millions of dollars worth of trading every single day.
At $30 million market cap, I cant see any other potential investment right now with this much potential upside.
This post has merely served as in introduction and a heads up for this project, there is MUCH more to cover like vortex liquidity, masternodes, TOR integration... for now, here is some additional reading. Resources
TLDR; No. Do you want to make money? I'd start with learning how to read.
submitted by hotprocession to CryptoMoonShots [link] [comments]

Why i’m bullish on Zilliqa (long read)

Edit: TL;DR added in the comments
 
Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analyzed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk-reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralized and scalable in my opinion.
 
Below I post my analysis of why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise, just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction
 
The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since the end of January 2019 with daily transaction rates growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralized and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. The maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realized early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralized, secure, and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in the amount of nodes. More nodes = higher transaction throughput and increased decentralization. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue dissecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour, no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts, etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as: “A peer-to-peer, append-only datastore that uses consensus to synchronize cryptographically-secure data”.
 
Next, he states that: "blockchains are fundamentally systems for managing valid state transitions”. For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber, and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa, this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network, etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever-changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralized and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimization on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and the University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (66%) double-spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT, etc. Another thing we haven’t looked at yet is the amount of decentralization.
 
Decentralisation
 
Currently, there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so-called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralized nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics, you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching its transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end-users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public. They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public-facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers. The 5% block rewards with an annual yield of 10.03% translate to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non-custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS; shard nodes and seed nodes becoming more decentralized too, Zilliqa qualifies for the label of decentralized in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. The faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time-stamped so you’ll start right away with a platform introduction, roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalized: programming languages can be divided into being ‘object-oriented’ or ‘functional’. Here is an ELI5 given by software development academy: * “all programs have two basic components, data – what the program knows – and behavior – what the program can do with that data. So object-oriented programming states that combining data and related behaviors in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behavior are different things and should be separated to ensure their clarity.” *
 
Scilla is on the functional side and shares similarities with OCaml: OCaml is a general-purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognized by academics and won a so-called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise, it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts, it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa or Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue: In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships
 
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organizations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggests that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already take advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, Airbnb, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human-readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They don't just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data, it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community-run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non-custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiative (correct me if I’m wrong though). This suggests in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real-time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding of what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures, Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

Why i’m bullish on Zilliqa (long read)

Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analysed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralised and scalable in my opinion.
 
Below I post my analysis why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since end of January 2019 with daily transaction rate growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralised and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. Maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realised early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralised, secure and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in amount of nodes. More nodes = higher transaction throughput and increased decentralisation. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue disecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as:
“A peer-to-peer, append-only datastore that uses consensus to synchronise cryptographically-secure data”.
 
Next he states that: >“blockchains are fundamentally systems for managing valid state transitions”.* For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralised and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimisation on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (>66%) double spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT etc. Another thing we haven’t looked at yet is the amount of decentralisation.
 
Decentralisation
 
Currently there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralised nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching their transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public.They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers.The 5% block rewards with an annual yield of 10.03% translates to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS & shard nodes and seed nodes becoming more decentralised too, Zilliqa qualifies for the label of decentralised in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. Faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time stamped so you’ll start right away with a platform introduction, R&D roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalised: programming languages can be divided into being ‘object oriented’ or ‘functional’. Here is an ELI5 given by software development academy: > “all programmes have two basic components, data – what the programme knows – and behaviour – what the programme can do with that data. So object-oriented programming states that combining data and related behaviours in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behaviour are different things and should be separated to ensure their clarity.”
 
Scilla is on the functional side and shares similarities with OCaml: > OCaml is a general purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognised by academics and won a so called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities safety is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa for Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue:
In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships  
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organisations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggest that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already taking advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, AirBnB, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are build on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”*
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They dont just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities) also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiatives (correct me if I’m wrong though). This suggest in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures & Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

Bitcoin (BTC)A Peer-to-Peer Electronic Cash System.

Bitcoin (BTC)A Peer-to-Peer Electronic Cash System.
  • Bitcoin (BTC) is a peer-to-peer cryptocurrency that aims to function as a means of exchange that is independent of any central authority. BTC can be transferred electronically in a secure, verifiable, and immutable way.
  • Launched in 2009, BTC is the first virtual currency to solve the double-spending issue by timestamping transactions before broadcasting them to all of the nodes in the Bitcoin network. The Bitcoin Protocol offered a solution to the Byzantine Generals’ Problem with a blockchain network structure, a notion first created by Stuart Haber and W. Scott Stornetta in 1991.
  • Bitcoin’s whitepaper was published pseudonymously in 2008 by an individual, or a group, with the pseudonym “Satoshi Nakamoto”, whose underlying identity has still not been verified.
  • The Bitcoin protocol uses an SHA-256d-based Proof-of-Work (PoW) algorithm to reach network consensus. Its network has a target block time of 10 minutes and a maximum supply of 21 million tokens, with a decaying token emission rate. To prevent fluctuation of the block time, the network’s block difficulty is re-adjusted through an algorithm based on the past 2016 block times.
  • With a block size limit capped at 1 megabyte, the Bitcoin Protocol has supported both the Lightning Network, a second-layer infrastructure for payment channels, and Segregated Witness, a soft-fork to increase the number of transactions on a block, as solutions to network scalability.

https://preview.redd.it/s2gmpmeze3151.png?width=256&format=png&auto=webp&s=9759910dd3c4a15b83f55b827d1899fb2fdd3de1

1. What is Bitcoin (BTC)?

  • Bitcoin is a peer-to-peer cryptocurrency that aims to function as a means of exchange and is independent of any central authority. Bitcoins are transferred electronically in a secure, verifiable, and immutable way.
  • Network validators, whom are often referred to as miners, participate in the SHA-256d-based Proof-of-Work consensus mechanism to determine the next global state of the blockchain.
  • The Bitcoin protocol has a target block time of 10 minutes, and a maximum supply of 21 million tokens. The only way new bitcoins can be produced is when a block producer generates a new valid block.
  • The protocol has a token emission rate that halves every 210,000 blocks, or approximately every 4 years.
  • Unlike public blockchain infrastructures supporting the development of decentralized applications (Ethereum), the Bitcoin protocol is primarily used only for payments, and has only very limited support for smart contract-like functionalities (Bitcoin “Script” is mostly used to create certain conditions before bitcoins are used to be spent).

2. Bitcoin’s core features

For a more beginner’s introduction to Bitcoin, please visit Binance Academy’s guide to Bitcoin.

Unspent Transaction Output (UTXO) model

A UTXO transaction works like cash payment between two parties: Alice gives money to Bob and receives change (i.e., unspent amount). In comparison, blockchains like Ethereum rely on the account model.
https://preview.redd.it/t1j6anf8f3151.png?width=1601&format=png&auto=webp&s=33bd141d8f2136a6f32739c8cdc7aae2e04cbc47

Nakamoto consensus

In the Bitcoin network, anyone can join the network and become a bookkeeping service provider i.e., a validator. All validators are allowed in the race to become the block producer for the next block, yet only the first to complete a computationally heavy task will win. This feature is called Proof of Work (PoW).
The probability of any single validator to finish the task first is equal to the percentage of the total network computation power, or hash power, the validator has. For instance, a validator with 5% of the total network computation power will have a 5% chance of completing the task first, and therefore becoming the next block producer.
Since anyone can join the race, competition is prone to increase. In the early days, Bitcoin mining was mostly done by personal computer CPUs.
As of today, Bitcoin validators, or miners, have opted for dedicated and more powerful devices such as machines based on Application-Specific Integrated Circuit (“ASIC”).
Proof of Work secures the network as block producers must have spent resources external to the network (i.e., money to pay electricity), and can provide proof to other participants that they did so.
With various miners competing for block rewards, it becomes difficult for one single malicious party to gain network majority (defined as more than 51% of the network’s hash power in the Nakamoto consensus mechanism). The ability to rearrange transactions via 51% attacks indicates another feature of the Nakamoto consensus: the finality of transactions is only probabilistic.
Once a block is produced, it is then propagated by the block producer to all other validators to check on the validity of all transactions in that block. The block producer will receive rewards in the network’s native currency (i.e., bitcoin) as all validators approve the block and update their ledgers.

The blockchain

Block production

The Bitcoin protocol utilizes the Merkle tree data structure in order to organize hashes of numerous individual transactions into each block. This concept is named after Ralph Merkle, who patented it in 1979.
With the use of a Merkle tree, though each block might contain thousands of transactions, it will have the ability to combine all of their hashes and condense them into one, allowing efficient and secure verification of this group of transactions. This single hash called is a Merkle root, which is stored in the Block Header of a block. The Block Header also stores other meta information of a block, such as a hash of the previous Block Header, which enables blocks to be associated in a chain-like structure (hence the name “blockchain”).
An illustration of block production in the Bitcoin Protocol is demonstrated below.

https://preview.redd.it/m6texxicf3151.png?width=1591&format=png&auto=webp&s=f4253304912ed8370948b9c524e08fef28f1c78d

Block time and mining difficulty

Block time is the period required to create the next block in a network. As mentioned above, the node who solves the computationally intensive task will be allowed to produce the next block. Therefore, block time is directly correlated to the amount of time it takes for a node to find a solution to the task. The Bitcoin protocol sets a target block time of 10 minutes, and attempts to achieve this by introducing a variable named mining difficulty.
Mining difficulty refers to how difficult it is for the node to solve the computationally intensive task. If the network sets a high difficulty for the task, while miners have low computational power, which is often referred to as “hashrate”, it would statistically take longer for the nodes to get an answer for the task. If the difficulty is low, but miners have rather strong computational power, statistically, some nodes will be able to solve the task quickly.
Therefore, the 10 minute target block time is achieved by constantly and automatically adjusting the mining difficulty according to how much computational power there is amongst the nodes. The average block time of the network is evaluated after a certain number of blocks, and if it is greater than the expected block time, the difficulty level will decrease; if it is less than the expected block time, the difficulty level will increase.

What are orphan blocks?

In a PoW blockchain network, if the block time is too low, it would increase the likelihood of nodes producingorphan blocks, for which they would receive no reward. Orphan blocks are produced by nodes who solved the task but did not broadcast their results to the whole network the quickest due to network latency.
It takes time for a message to travel through a network, and it is entirely possible for 2 nodes to complete the task and start to broadcast their results to the network at roughly the same time, while one’s messages are received by all other nodes earlier as the node has low latency.
Imagine there is a network latency of 1 minute and a target block time of 2 minutes. A node could solve the task in around 1 minute but his message would take 1 minute to reach the rest of the nodes that are still working on the solution. While his message travels through the network, all the work done by all other nodes during that 1 minute, even if these nodes also complete the task, would go to waste. In this case, 50% of the computational power contributed to the network is wasted.
The percentage of wasted computational power would proportionally decrease if the mining difficulty were higher, as it would statistically take longer for miners to complete the task. In other words, if the mining difficulty, and therefore targeted block time is low, miners with powerful and often centralized mining facilities would get a higher chance of becoming the block producer, while the participation of weaker miners would become in vain. This introduces possible centralization and weakens the overall security of the network.
However, given a limited amount of transactions that can be stored in a block, making the block time too longwould decrease the number of transactions the network can process per second, negatively affecting network scalability.

3. Bitcoin’s additional features

Segregated Witness (SegWit)

Segregated Witness, often abbreviated as SegWit, is a protocol upgrade proposal that went live in August 2017.
SegWit separates witness signatures from transaction-related data. Witness signatures in legacy Bitcoin blocks often take more than 50% of the block size. By removing witness signatures from the transaction block, this protocol upgrade effectively increases the number of transactions that can be stored in a single block, enabling the network to handle more transactions per second. As a result, SegWit increases the scalability of Nakamoto consensus-based blockchain networks like Bitcoin and Litecoin.
SegWit also makes transactions cheaper. Since transaction fees are derived from how much data is being processed by the block producer, the more transactions that can be stored in a 1MB block, the cheaper individual transactions become.
https://preview.redd.it/depya70mf3151.png?width=1601&format=png&auto=webp&s=a6499aa2131fbf347f8ffd812930b2f7d66be48e
The legacy Bitcoin block has a block size limit of 1 megabyte, and any change on the block size would require a network hard-fork. On August 1st 2017, the first hard-fork occurred, leading to the creation of Bitcoin Cash (“BCH”), which introduced an 8 megabyte block size limit.
Conversely, Segregated Witness was a soft-fork: it never changed the transaction block size limit of the network. Instead, it added an extended block with an upper limit of 3 megabytes, which contains solely witness signatures, to the 1 megabyte block that contains only transaction data. This new block type can be processed even by nodes that have not completed the SegWit protocol upgrade.
Furthermore, the separation of witness signatures from transaction data solves the malleability issue with the original Bitcoin protocol. Without Segregated Witness, these signatures could be altered before the block is validated by miners. Indeed, alterations can be done in such a way that if the system does a mathematical check, the signature would still be valid. However, since the values in the signature are changed, the two signatures would create vastly different hash values.
For instance, if a witness signature states “6,” it has a mathematical value of 6, and would create a hash value of 12345. However, if the witness signature were changed to “06”, it would maintain a mathematical value of 6 while creating a (faulty) hash value of 67890.
Since the mathematical values are the same, the altered signature remains a valid signature. This would create a bookkeeping issue, as transactions in Nakamoto consensus-based blockchain networks are documented with these hash values, or transaction IDs. Effectively, one can alter a transaction ID to a new one, and the new ID can still be valid.
This can create many issues, as illustrated in the below example:
  1. Alice sends Bob 1 BTC, and Bob sends Merchant Carol this 1 BTC for some goods.
  2. Bob sends Carols this 1 BTC, while the transaction from Alice to Bob is not yet validated. Carol sees this incoming transaction of 1 BTC to him, and immediately ships goods to B.
  3. At the moment, the transaction from Alice to Bob is still not confirmed by the network, and Bob can change the witness signature, therefore changing this transaction ID from 12345 to 67890.
  4. Now Carol will not receive his 1 BTC, as the network looks for transaction 12345 to ensure that Bob’s wallet balance is valid.
  5. As this particular transaction ID changed from 12345 to 67890, the transaction from Bob to Carol will fail, and Bob will get his goods while still holding his BTC.
With the Segregated Witness upgrade, such instances can not happen again. This is because the witness signatures are moved outside of the transaction block into an extended block, and altering the witness signature won’t affect the transaction ID.
Since the transaction malleability issue is fixed, Segregated Witness also enables the proper functioning of second-layer scalability solutions on the Bitcoin protocol, such as the Lightning Network.

Lightning Network

Lightning Network is a second-layer micropayment solution for scalability.
Specifically, Lightning Network aims to enable near-instant and low-cost payments between merchants and customers that wish to use bitcoins.
Lightning Network was conceptualized in a whitepaper by Joseph Poon and Thaddeus Dryja in 2015. Since then, it has been implemented by multiple companies. The most prominent of them include Blockstream, Lightning Labs, and ACINQ.
A list of curated resources relevant to Lightning Network can be found here.
In the Lightning Network, if a customer wishes to transact with a merchant, both of them need to open a payment channel, which operates off the Bitcoin blockchain (i.e., off-chain vs. on-chain). None of the transaction details from this payment channel are recorded on the blockchain, and only when the channel is closed will the end result of both party’s wallet balances be updated to the blockchain. The blockchain only serves as a settlement layer for Lightning transactions.
Since all transactions done via the payment channel are conducted independently of the Nakamoto consensus, both parties involved in transactions do not need to wait for network confirmation on transactions. Instead, transacting parties would pay transaction fees to Bitcoin miners only when they decide to close the channel.
https://preview.redd.it/cy56icarf3151.png?width=1601&format=png&auto=webp&s=b239a63c6a87ec6cc1b18ce2cbd0355f8831c3a8
One limitation to the Lightning Network is that it requires a person to be online to receive transactions attributing towards him. Another limitation in user experience could be that one needs to lock up some funds every time he wishes to open a payment channel, and is only able to use that fund within the channel.
However, this does not mean he needs to create new channels every time he wishes to transact with a different person on the Lightning Network. If Alice wants to send money to Carol, but they do not have a payment channel open, they can ask Bob, who has payment channels open to both Alice and Carol, to help make that transaction. Alice will be able to send funds to Bob, and Bob to Carol. Hence, the number of “payment hubs” (i.e., Bob in the previous example) correlates with both the convenience and the usability of the Lightning Network for real-world applications.

Schnorr Signature upgrade proposal

Elliptic Curve Digital Signature Algorithm (“ECDSA”) signatures are used to sign transactions on the Bitcoin blockchain.
https://preview.redd.it/hjeqe4l7g3151.png?width=1601&format=png&auto=webp&s=8014fb08fe62ac4d91645499bc0c7e1c04c5d7c4
However, many developers now advocate for replacing ECDSA with Schnorr Signature. Once Schnorr Signatures are implemented, multiple parties can collaborate in producing a signature that is valid for the sum of their public keys.
This would primarily be beneficial for network scalability. When multiple addresses were to conduct transactions to a single address, each transaction would require their own signature. With Schnorr Signature, all these signatures would be combined into one. As a result, the network would be able to store more transactions in a single block.
https://preview.redd.it/axg3wayag3151.png?width=1601&format=png&auto=webp&s=93d958fa6b0e623caa82ca71fe457b4daa88c71e
The reduced size in signatures implies a reduced cost on transaction fees. The group of senders can split the transaction fees for that one group signature, instead of paying for one personal signature individually.
Schnorr Signature also improves network privacy and token fungibility. A third-party observer will not be able to detect if a user is sending a multi-signature transaction, since the signature will be in the same format as a single-signature transaction.

4. Economics and supply distribution

The Bitcoin protocol utilizes the Nakamoto consensus, and nodes validate blocks via Proof-of-Work mining. The bitcoin token was not pre-mined, and has a maximum supply of 21 million. The initial reward for a block was 50 BTC per block. Block mining rewards halve every 210,000 blocks. Since the average time for block production on the blockchain is 10 minutes, it implies that the block reward halving events will approximately take place every 4 years.
As of May 12th 2020, the block mining rewards are 6.25 BTC per block. Transaction fees also represent a minor revenue stream for miners.
submitted by D-platform to u/D-platform [link] [comments]

Staking in Ethereum 2.0: when will it appear and how much can you earn on it?

Staking in Ethereum 2.0: when will it appear and how much can you earn on it?

Staking in Ethereum 2.0: when will it appear and how much can you earn on it?

Why coin staking will be added in Ethereum 2.0

A brief educational program for those who do not follow the update of the project of Vitalik Buterin. Ethereum has long been in need of updating, and the main problem of the network is scalability: the blockchain is overloaded, transactions are slowing down, and the cost of “gas” (transaction fees) is growing. If you do not update the consensus algorithm, then the network will someday cease to be operational. To avoid this, developers have been working for several years on moving the network from the PoW algorithm to state 2.0, running on PoS. This should make the network more scalable, faster and cheaper. In December last year, the first upgrade phase, Istanbul, was implemented in the network, and in April of this year, the Topaz test network with the possibility of staking was launched - the first users already earned 1%. In the PoS algorithm that Ethereum switches to, there is no mining, and validation occurs due to the delegation of user network coins to the masternodes. For the duration of the delegation, these coins are frozen, and for providing their funds for block validation, users receive a portion of the reward. This is staking - such a crypto-analogue of a bank deposit. There are several types of staking: with income from dividends or masternodes, but not the device’s power, as in PoW algorithms, but the number of miner coins is important in all of them. The more coins, the higher the income. For crypto investors, staking is an opportunity to receive passive income from blocked coins. It is assumed that the launch of staking:
  • Will make ETH mining more affordable, but less resource intensive;
  • Will make the network more secure and secure - attacks will become too expensive;
  • Will create an entirely new sector of steak infrastructure around the platform;
  • Provides increased scalability, which will create the opportunity for wider implementation of DeFi protocols;
  • And, most importantly, it will show that Ethereum is a developing project.

The first payments to stakeholders will be one to two years after the launch of the update

The minimum validator steak will be 32 ETN (≈$6092 for today). This is the minimum number of coins that an ETH holder must freeze in order to qualify for payments. Another prerequisite is not to disconnect your wallet from the network. If the user disconnects and goes into automatic mode, he loses his daily income. If at some point the steak drops below 16 ETH, the user will be deprived of the right to be a validator. The Ethereum network has to go through many more important stages before coin holders can make money on its storage. Collin Myers, the leader of the product strategy at the startup of the Ethereum developer ConsenSys, said that the genesis block of the new network will not be mined until the total amount of frozen funds reaches 524,000 ETN ($99.76 million at the time of publication). So many coins should be kept by 16,375 validators with a minimum deposit of 32 ETN. Until this moment, none of them will receive a percentage profit. Myers noted that this event is not tied to a clear time and depends on the activity of the community. All validators will have to freeze a rather significant amount for an indefinite period in the new network without confidence in the growth of the coin rate. It’s hard to say how many people there are. The developers believe that it will take 12−18 or even 24 months. According to the latest ConsenSys Codefi report, more than 65% of the 300 ETH owners surveyed plan to use the staking opportunity. This sample, of course, is not representative, but it can be assumed that most major coin holders will still be willing to take a chance.

How much can you earn on Ethereum staking

Developers have been arguing for a long time about what profitability should be among the validators of the Ethereum 2.0 network. The economic model of the network maintains an inflation rate below 1% and dynamically adjusts the reward scale for validators. The difficulty is not to overpay, but not to pay too little. Profitability will be variable, as it depends on the number and size of steaks, as well as other parameters. The fewer frozen coins and validators, the higher the yield, and vice versa. This is an easy way to motivate users to freeze ETN. According to the October calculations of Collin Myers, after the launch of Ethereum 2.0, validators will be able to receive from 4.6% to 10.3% per annum as a reward for their steak. At the summit, he clarified that the first time after the launch of the Genesis block, it can even reach 20.3%. But as the number of steaks grows, profitability will decline. So, with five million steaks, it drops to about 6.6%. The above numbers are not net returns. They do not include equipment and electricity costs. According to Myers, after the Genesis block, the costs of maintaining the validator node will be about 4.75% of the remuneration. They will continue to increase as the number of blocked coins increases, and with a five millionth steak, they will grow to about 14.7%. Myers emphasized that profitability will be higher for those who will work on their own equipment, rather than relying on cloud services. The latter, according to his calculations, at current prices can bring a loss of up to minus 15% per year. This, he believes, promotes true decentralization. At the end of April, Vitalik Buterin said that validators will be able to earn 5% per annum with a minimum stake of 32 ETH - 1.6 ETH per year, or $ 304 at the time of publication. However, given the cost of freezing funds, the real return will be at 0.8%.

How to calculate profitability from ETN staking

The easiest way to calculate the estimated return for Ethereum staking is to use a special calculator. For example, from the online services EthereumPrice or Stakingrewards. The service takes into account the latest indicators of network profitability, as well as additional characteristics: the time of operation of a node in the network, the price of a coin, the share of blocked ETNs and so on. Depending on these values, the profit of the validator can vary greatly. For example, you block 32 ETNs at today's coin price - $190, 1% of the coins are blocked, and the node works 99% of the time. According to the EthereumPrice calculator, in this case your yield will be 14.25% per annum, or 4.56 ETH.
Validator earnings from the example above for 10 years according to EthereumPrice.
If to change the data, you have the same steak, but the proportion of blocked coins is 10%. Now your annual yield is only 4.51%, or 1.44 ETH.
Validator earnings from the second example over 10 years according to EthereumPrice.
It is important that this is profitability excluding expenses. Real returns will be significantly lower and in the second case may be negative. In addition, you must consider the fluctuation of the course. Even with a yield of 14% per annum in ETN, dollar-denominated returns may be negative in a bear market.

When will the transition to Ethereum 2.0 start

Ben Edgington from Teku, the operator of Ethereum 2.0, at the last summit said that the transition to PoS could be launched in July this year. These deadlines, if there are no new delays, were also mentioned by experts of the BitMEX crypto exchange in their recent report on the transition of the Ethereum ecosystem to stage 2.0. However, on May 12, Vitalik Buterin denied the possibility of launching Ethereum 2.0 in July. The network is not yet ready and is unlikely to be launched before the end of the year. July 30 marks the 5th anniversary of the launch of Ethereum. Unfortunately, it seems that it will not be possible to start the update for the anniversary again. Full deployment of updates will consist of several stages. Phase 0. Beacon chain. The "zero" phase, which can be launched in July this year. In fact, it will only be a network test and PoS testing without economic activity, but it will use new ETN coins and the possibility of staking will appear. The "zero" phase will test the first layer of Ethereum 2.0 architecture - Lighthouse. This is the Ethereum 2.0 client in Rust, developed back in 2018. Phase 1. Sharding - rejection of full nodes in favor of load balancing between all network nodes (shards). This should increase network bandwidth and solve the scalability problem. This is the first full phase of Ethereum 2.0. It will initially be deployed with 64 shards. It is because of sharding that the transition of a network to a new state is so complicated - existing smart contracts cannot be transferred to a new network. Therefore, at first, perhaps several years, both networks will exist simultaneously. Phase 2. State execution. In this phase, various applications will work, and it will be possible to conclude smart contracts. This is a full-fledged working Ethereum 2.0 network. After the second phase, two networks will work in parallel - Ethereum and Ethereum 2.0. Coin holders will be able to transfer ETN from the first to the second without the ability to transfer them back. To stimulate network support, coin emissions in both networks will increase until they merge. Read more about the phases of transition to state 2.0 in the aforementioned BitMEX report.

How the upgrade to Ethereum 2.0 will affect the staking market and coin price

The transition of the second largest coin to PoS will dramatically increase the stake in the market. The deposit in 32 ETH is too large for most users. Therefore, we should expect an increase in offers for staking from the exchanges. So, the launch of such a service in November was announced by the largest Swiss crypto exchange Bitcoin Suisse. She will not have a minimum deposit, and the commission will be 15%. According to October estimates by Binance Research analysts, the transition of Ethereum to stage 2.0 can double the price of a coin and the stake of staking in the market, and it will also make ETH the most popular currency on the PoS algorithm. Adam Cochran, partner at MetaCartel Ventures DAO and developer of DuckDuckGo, argued in his blog that Ethereum's transition to state 2.0 would be the “biggest event” of the cryptocurrency market. He believes that a 3–5% return will attract the capital of large investors, and fear of lost profit (FOMO) among retail investors will push them to actively buy coins. The planned coin burning mechanism for each transaction will reduce the potential oversupply. However, BitMEX experts in the report mentioned above believe that updating the network will not be as important an event as it seems to many, and will not have a significant impact on the coin rate and the staking market. Initially, this will be more likely to test the PoS system, rather than a full-fledged network. There will be no economic activity and smart contracts, and interest for a steak will not be paid immediately. Therefore, most of the economic activity will continue to be concluded in the original Ethereum network, which will work in parallel with the new one. Analysts of the exchange emphasized that due to the addition of staking, the first time (short, in their opinion) a large number of ETNs will be blocked on the network. Most likely, this will limit the supply of coins and lead to higher prices. However, this can also release some of the ETNs blocked in smart contracts, and then the price will not rise. Moreover, the authors of the document are not sure that the demand for coins will be long-term and stable. For this to happen, PoS and sharding must prove that they work stably and provide the benefits for which the update was started. But, if this happens, the network is waiting for a wave of coins from the developers of smart contracts and DeFi protocols. In any case, quick changes should not be expected. A full transition to Ethereum 2.0 will take years and won’t be smooth - network failures are inevitable. We also believe that we should not rely on Ethereum staking as another panacea for all the problems of the coin and the market. Most likely, the transition of the network to PoS will not have a significant impact on the staking market, but may positively affect the price of the coin. However, relying on the ETN rally in anticipation of this is too optimistic.
Subscribe to our Telegram channel
submitted by Smart_Smell to Robopay [link] [comments]

Telegram AMA - Summary

Telegram AMA - Summary
https://preview.redd.it/hml53mmh5er41.png?width=568&format=png&auto=webp&s=3f0cd662e1836bcb2ea37793cbbbfd6f8a5e9723
Zhuling Chen
It’s always great to hang out in this group. This group means a lot to the Aelf community. It is the first Aelf community and has been there through all the ups and downs in the world. I would like to start with wishing everyone is staying safe at home during the virus outbreak. It definitely has been a difficult time for all of us, but together we can pull through it.
We understand that the situation is quite striking to all of us. But I really believe that the solution to the virus outbreak is about more global coordination and collaboration.
All of you to be assured, our team in different places are all safe and working from home as normal.
The Aelf team in Beijing were among the early ones experiencing the virus outbreak. As everyone was on the way home for Lunar New Year holiday and then experienced a total city lock-down followed by a 40 days’ work from home policy. It was definitely not easy for them, but our team stayed strong, took necessary precautions and focused on work with the right morale. Mappo has recently published some tips on how to work from home effectively based on our experience. Do check it out. Despite not working in the office since February, we have achieved great progress, including launching Aelf 1.0 preview, which is an important milestone in technical delivery and also the roadmap to mainnet launch (which listed out the essential steps for the community to work together to launch a successful public network)
Let's first talk about Aelf v1.0 preview. It is the cornerstone of the mainnet launch. The product itself has all the features that the public network is needed. The codebase has been reviewed and tested rigorously by the team. And a few highlights of how the network would look like:
  1. The code allows a stable and high throughput blockchain network to operate publicly.
  2. For developers, they will love how flexible the system is to be customized, the number of tools and documentation to help them start developing applications on the network
  3. For the whole community, the system is an ever-evolving one where the voting system is ready in place to conduct network-wide voting on various topics, such as transaction fee adjustment, network protocol upgrade, incentive adjustment, etc
  4. Aelf system is able to run multi-chain architecture where each side chain will host different applications and still ready to work with each other
So you may ask since the software is ready, why have we not yet launched the public network? The answer, in short, is that a public blockchain is launched not by a team but through a community effort and that's why we are coordinating the community effort based on the roadmap we proposed. Aelf team has launched the public testnet based on Aelf v1.0 preview and currently, all nodes are under the team. The goal is to let the community and elected nodes to take it over and launch it on a global scale. Not only launch it but also be familiar with the network and also set the launch parameters in a decentralized way. If we take a car as an example, we have made the car, but ultimately the drivers are you guys and therefore before it really hits on the road, we need to guide the community to do a test drive, adjust the car based on what really works for YOU, and ultimately let YOU drive the car freely and safely
So how are we going to help the community launch the network:
First of all, we have launched the codes, documents about the economic system and governance model and technical features. With all the things available, you are able to understand what the system is about, as a token holder what's your benefit in the system, and being a node in the system plays a big role in the governance
Next, without yet electing the nodes, we will get all token holders to join the current Aelf network through a mapping event. That means as long as you have Aelf tokens, you will be able to get 1:1 test tokens on the public testnet. that gives you full access to all the features, and you will feel like you are already using the mainnet. You will get rewarded in making transactions, voting, etc.
Do try out the Aelf wallet and voting features, you will see how easy to transfer tokens cross-chain. and also how flexible the system allows people to make changes. For example, the community may want to adjust the block rewarding parameters or fees to use certain services on mainnet, they can initiate a discussion and then vote in the system and once voted through, it will be reflected on mainnet.
For people or organizations that want to play a bigger role in the system, we will do a dry run of node election. Take it as the real node election before mainnet launch. We will see who the active members of the community are and being trusted by the community. Among the nodes, we will form a network launch committee. The committee will be the crucial party to oversees and ensures the smooth launch of Aelf mainnet, instead of just relying on the Aelf team. This is our step towards decentralization.
The committee will agree on the actual launch process, final checking all the parameters in the system to be ready for launch and then decide when the criteria are met to launch the network. Once all that is decided. We will invite all interested nodes to apply for the election and let the community know what's their plan to grow the Aelf network. the network will initially be launched with a few nodes from the committee and gradually be replaced by the selected nodes (a bootstrap phase). Along the way, we will work with exchanges to conduct token swap (which we are also designing an innovative system to further enhance security and usability of Aelf tokens in exchanges)
Among this isolated and worrisome time, at least we all have something to look forward to: a successful launch of Aelf network! Once it is launched, we are excited to see a vibrant and technically superior network that is good for Dapps to run on top of it.
https://preview.redd.it/yp28n1jj5er41.png?width=559&format=png&auto=webp&s=c470cdedd7f8923f29a3b1bd777476f22cc76521
Doris Guo Q1: As a Blockchain start-up, what difficulties have you overcome when starting Aelf project? What motivates you to solve difficulties and achieve success today?
Zhuling Chen First, just like launching any start-up, its community and investors are usually regional. There is always some bias on if Asian projects are solid. It is really rare to have an Asian project to be supported by western funds and community from day 1. We were lucky to have overcome that obstacle. Having a global investor line-up from day 1. Having a global team from day 1 and also working with a global community from day 1. This benefited us to have an international perspective which is crucial in the blockchain industry.
Secondly, as a hardcore technology company, it is really hard to put in plain words what is our ambition. Our ambition is huge, achieving key innovations in multiple fronts of blockchain technology and organically combined them to serve real users for the future. Our marketing team has been working really hard to elaborate on what Aelf is. Now we have come to a point that the product is ready. Therefore, it is much easier for all of us to understand how solid Aelf is by trying out the network ourselves! That's exactly what the following events will be about - Try out all the exciting features of Aelf network before mainnet launch.
Doris Guo Q2: What critical problems do you see occurring in the blockchain industry nowadays? How does Aelf solve these problems?
Haobo Ma First, we need to distinguish the difference between BTC and ETH. One is Digital Cash and the other is the Smart Contract Platform. Aelf addresses most of the latter's problems. In short, it can be summarized as performance, end-user friendly, developer-friendly, network economy, and self-governance and upgrading. Each of these areas will probably take up a lot of space, and as a whole are the issues described in our two white papers. In short, Aelf is faster, end-users do not need to know the rules of the blockchain, developers can set up the development environment in 10 minutes, have a good economic model and can carry out proposal governance on the chain.
Doris Guo Q3: What is your long-term vision about the industry which Aelf is working at? Are you afraid someday there will be another project with more innovative technology can replace Aelf?
Haobo Ma Let's talk about where Aelf stands in the traditional Internet. It is essentially a cloud service provider, Aelf provides resources and infrastructure for developers to deploy their services, known as smart contracts. We eventually want Aelf to grow like AAA (Amazon, Azure, AliCloud). Because Aelf is a network that can be dynamically scaled, we can accept any new technology, some of the more advanced technologies we can put on a side chain.
Doris Guo Q4: Why did Aelf choose for cross-chain interaction?
Haobo Ma As I mentioned earlier, Aelf solves the Smart Contract Platform problem. However, there are other digital cash problems as well which we would need to use existing infrastructure such as Bitcoin's chain in order to interact with Bitcoin. There are a lot of infrastructures on Ethereum that we want to interact with. Multi-chain on Aelf network mainly is to isolate resources to improve network performance and network stability.
Doris Guo Q5: What difficulties do the Aelf team have now (I talk about COVID-19)? How does the Aelf team solve it? Have you changed the roadmap?
Haobo Ma There is no great impact. The teams in Singapore and Beijing are communicating with each other remotely on a regular basis. The only change is that most of us are now working from home which has no impact and in fact, it seems conducive to the acceptance of more community developers in the future to come. From the internal working schedule and development timeline, there is no great impact. We do not publish specific timeline as we do not want short term holders (traders) to create too much negative pressure on product development.
Doris Guo Q6: Aelf is an open-source blockchain, and there's the common problem of taking a substantial amount of time for the different participants to agree on strategic decisions. What types of governance models do you use in Aelf to address this issue???
Haobo Ma The issue is about public blockchain network, and who can decide the direction of the network. Our answer is long-term holders. For the short-term holders (traders), we refuse to allow them to participate in any discussion of the direction of Aelf because the short-term holders are likely to make a profit and sell quickly, which is essentially the same example of a person who cheats the President and then runs away for his personal gain. We defined a number of proposal processes, including the logic of the two-party system in the United States, and the participation in the referendum to ensure that the final proposal represents the majority. At the same time, we are looking for some legal solutions to avoid bifurcation, such as prohibiting exchanges from intervening in bifurcated new tokens. While we cannot limit a community, we should be able to find ways to limit a centralized organization. This restriction is akin to a ban on national secession.
Doris Guo Q7: How will Aelf empower Investors, Companies, Developers, Platform Users to deliver impactful solutions and bring value to people all over the world?
Haobo Ma We will learn from the operational experience of successful foundations such as the LINUX foundation and license some commercial companies to use Aelf solutions to solve business problems. At the same time, Aelf is an open-source product under the MIT License, and we accept any use that does not violate this open-source principle.
Zhuling Chen Let me add on to Haobo’s statement: to incentivize and empower the community, we are also exploring ways to let the community decide how to use the funds for Aelf (allocate to where it matters to our community) once mainnet is launched. This means you guys can decide what are the projects to be funded on Aelf, etc
Doris Guo Q8:When will the node campaign start? How will Aelf attract users to participate in nodes election?
Haobo Ma According to our published roadmap, the timeline can be dynamic, but I don't think it will be too long. The main idea is to let everyone understand what we envision Aelf to be like, and what are the rights and benefits of being a node in the future. We hope to find nodes that fully recognize the efforts of Aelf at the present stage and are willing to participate in the future development of Aelf. We will run a simulation of the node campaign on the testnet and set up a temporary mainnet launch committee. Please follow our official Twitter for more upcoming details!
Doris Guo Q9: Token swap form 2 is some kind of cross-chain transfer? It will be handled by a smart contract?
Haobo Ma It is handled by the smart contract, we define an asset cross-chain transfer protocol, but it may be opened after a snapshot.
Doris Guo Q10: Which Exchanges will support token swap? Do you have any plan to list Aelf in some big exchange like Binance, Houbi, Kucoin, .......?
Haobo Ma We are already in talks with some exchanges, there is still competition between exchanges, and many are still hoping to attract more users by getting access to mainnet token swap early.
Doris Guo Q11: Aside conversion of the current tokens to mainnet tokens, what other main features will be accomplished with the mainnet launch?
Haobo Ma We have a documentation file that has been published, which has listed some features: https://Aelf.io/gridcn/Aelf_public_testnet_and_supporting_features_introduction_en_v1.0.pdf
Doris Guo Q12: Do you have any plan to burn or buyback your coin?
Haobo Ma We have plans for the community to govern through DAO, we have no interest in short-term price incentive adjustment as we would prefer to drive the project to higher adoption. After mainnet starts operation, there will be a part of network revenue get destroyed automatically.
Doris Guo Q13: Often, as a newbie developer, I face difficulties on most blockchains. How easy and convenient is it for me on Aelf, and what programming language and tools are needed??
Haobo Ma We set up staging for DAPP developers on GitHub and configured CI. Develop a smart contract using C# with React Native on the front end. So, in fact, developers can fork the source code without setting up the environment locally, and you can conduct unit testing with the help of CI. You can also release the smart contract and generate the installation package of iOS and android online. https://github.com/AElfProject/Aelf-boilerplate
Doris Guo Q14: What is the progress of business development and what are some of your commercial partnerships? How will Aelf rapidly develop the number & performance of DAPP?
Haobo Ma First of all, the blockchain industry is still fairly small and users with ETH and EOS wallets are considered a very small group and its not effective to even promote within these groups. What we need to consider is how to enable users who have never been exposed to blockchain to use DAPP. The competitiveness of Aelf is to make it easier for Aelf developers to promote their DAPP to ordinary users, rather than to teach ordinary users a lot on blockchain knowledge. The average user doesn't like to hear about private keys, mnemonic, Gas Price, RAM, CPU, etc. Only until we solve such problems, companies that need to solve problems through blockchain will be more inclined to use Aelf in technology selection. Therefore, our main work is to explain the competitive advantages of Aelf, ETH and EOS to everyone. We have some business cooperation’s, but we also believe that simply through case-by-case business cooperation will not be able to gain adoption so quickly, therefore we still need to put our products to stay ahead of the next generation.
Doris Guo Q15: What other activities can encourage more people to be confident about Aelf?
Haobo Ma We are only going to state the truth by having those that have faith in us to stay and those that don't to leave. The development of Aelf is not driven by a single foundation, but by a steady stream of contributions from the community. In the future, we will also place the activities in the DAO for on-chain governance, and let the community make decisions by itself.

https://preview.redd.it/e66vhqvl5er41.png?width=555&format=png&auto=webp&s=412a2dd831ba3817806e48855f158482bf671770
Kun Aguero As you know that in the present market situation many new coins or either dying or thriving for liquidity? How will you manage this liquidity problem?
Zhuling Chen Aelf started in 2017. we have gone through a few cycles in the market, still, remember the big down period in 2018-2019. Aelf is financially solid and the team has always been working hard. if you are referring to liquidity in exchanges, we are among the lucky ones that are listed in all major exchanges
Xinshu Dong Hello, great discussions! I would like to ask what are the criteria to join the committee for launching the mainnet? Would love to participate
Zhuling Chen Hi xinshu, great to see you here. The committee will be chosen among the nodes elected during the testnet dry run. Which means, it is really important to participate in the testnet dry run and also start to establish your reputation in the community so that people will elect you as a node. The detailed criteria will include what is your plan to help Aelf to grow, tech competency and reputation.
An Da What are Aelf’s achievements in 2019? Who had supported you to get those things?
Zhuling Chen To name a few, in 2019, Aelf is one of the most active projects on GitHub. This means Aelf is evolving and improving fast in this space and our team has the tech strength. In addition, we have also successfully listed on all major cloud service providers, such as AWS, Azure, Google. So large companies can easily launch Aelf side chains in their organization with minimum hassle.
John How does the voting for master nodes candidates occur? And why is the development of this system important for your project?
Zhuling Chen Voting is going to be pretty simple. All token holders can vote for the nodes they support on our block explorer.
Miha After mainnet lunch, how will you assure that transactional fees will stay low? We know what sometimes happens to fees on ETH blockchain.
Zhuling Chen First of all, due to the fact that is Aelf is scalability, this will reduce transaction fee. Secondly, all transaction fees will be voted by the nodes (which will be elected by you). So they will represent your interest
Bobbyfernandito Currently, as we see All projects are concerned with the speed and security. So, tell us here - what are the facilities Aelf provide to their user and investors?
Haobo Ma Security: we have an automated smart contract code audit. During contract deployment, production nodes and the community audit participation are required. On the other hand, we are also planning to provide a standardized model of centralized exchange access for 100% asset certification and emergency measures to deal with exchange attacks, which we will be released later. Speed: Aelf has been working on improving performance, which is transparent to users which they can also experience by themselves.
An Da What effect does Aelf token have on the Aelf ecosystem? Holding Aelf, what benefits will users receive?
Zhuling Chen Holding ELF enables you to use all the services on the Aelf network. ELF has a deflating system where the total amount will reduce as the network grows. token holders can also vote for the nodes to run the network and also vote for big decisions in the network. part of the fees in the system will also be distributed to token holders via a smart contract
ahihi132 Which companies do you view them as potential partners and that they are somewhat also beneficial for both the user base and Aelf itself?
Zhuling Chen Great question, if I could write a wish list, that will be: let medium-sized financial institutions to use Aelf to challenge the big boys. Let telecommunication companies use Aelf for micro-payment and other innovative business models. We also would like to try out a few public sector projects, which blockchain will is still more transparency and trust
Misun Q1: Which programming languages are you using in your project? And why? Q2-What are another big MILESTONES you have planned for 2020 roadmap and how are they supposed to benefit your costumers? Will it be an exciting year?
Haobo Ma For Q1: We mainly use C# for development, I personally like it. Performance is good, development environment IDEs are strong, and C# creators are influential in the industry. We believe in the right thing, though it may take a while to develop. The smart contract will then add support for multiple languages, such as WebAssembly, depending on the needs of the community. Now it seems that C# is enough.
Hambi crypto Which platforms are your competitors? How will you soar above them, and what better things do you offer than them? So, What’s your outlook on the future of cryptocurrencies in this year and next few years?
Haobo Ma As I have already mentioned this before, Eth and Eos. We provide better performance, cross-chain support (already implemented), end-users do not need to know the details of the blockchain, developer’s payment models and so on.
Floris-Jan What plans is Aelf making to prevent centralized exchange to take over the DPoS algorithm like what happened to Steem? Are we talking about blacklisting exchange wallets, or having the foundation say "No", or putting all trust in the community?
Zhuling Chen Great question, Floris. I’m not going to give away all the details of what Haobo has proposed to work on this, but in a nutshell, in Aelf system, exchange wallets will not be allowed to vote, but only the sub-wallets for each individual can vote. This will also help exchanges to prevent hacking and theft in the future
Alex What your plans in place for global expansion, are Aelf wallet focusing on the only market at this time? Or focus on building and developing or getting customers and users, or partnerships? Can you explain this?
Haobo Ma Our core focus will be through the developers to promote, developers will help Aelf to attract more users. So our product has to be attractive to developers. Just like AWS, they only focus on getting their service right, their developers will think about how to promote it. We don't want to burden them in their promotion process.
Ellkay What do you think are the major threats and barriers that could face the development and adoption of Aelf?
Haobo Ma If I'm a DAPP developer and I need to promote my APP to people who don't recognize blockchain, then I'd like to choose a platform that doesn't have to explain a lot of blockchain details to the end-user, so they can use it easily. We've provided some options in the Boilerplate that allow you to log-in simply via QR code + Password, and our recommended Dapp is an independent wallet and a separate iOS/Android application.
ahihi132 Give me some important reasons why we need to hold Aelf token where in fact hundreds of projects failed and it went to bankruptcy or even developers run when they collect millions/billions of funds?
Haobo Ma First of all, we will not give any suggestions as we only describe the fact that the long-term token holder will be able to govern the Aelf network, get Aelf mining reward and Aelf network profit. At the same time, Aelf network is a deflation model, Aelf network received transaction fees, profit dividends will immediately destroy 10% etc. All investments are risky, and we don't judge the behaviour of other developers. There are so many things in this world that cannot be understood and unfair. It is important to do our job well. I cannot explain these things.
见愁 I remember that boss Ma mentioned to only find those truly innovative applications and enterprises with blockchain, how to find and win partners in these aspects?
Haobo Ma When Linus was developing Linux, I did not think he would find a lot of collaboration when the code was not good. The response we can give is that we already have a lot of interest in cooperation, including what we have announced, what we have not announced, etc.
见愁 How interested are cloud computing providers in participating nodes?
Haobo Ma The vast majority of our nodes should be using cloud services, and as long as a large number of our 17 nodes and other candidate nodes are based on cloud services, our network robustness is determined by these cloud computing providers. Of course, in the expansion, we can also use cloud computing services.
submitted by Floris-Jan to aelfofficial [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

https://preview.redd.it/3t3z6hkbxel31.png?width=1920&format=png&auto=webp&s=ac989c2752c726e10d2291eb271721ceaa332a30

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.

https://preview.redd.it/xew1eu1exel31.png?width=1558&format=png&auto=webp&s=df960ded46d40fc9bf0ae8b54ff3b3b86276708a
Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.

https://preview.redd.it/pe166qyexel31.png?width=1561&format=png&auto=webp&s=d4c982089276e64cd909537c9ce744b59e168b6d
Some problems with these methods:
  • They add a lot of Overhead / Latency. Rather than just having the consensus of Blockchain A and B, you add the consensus mechanism of the Interoperability Blockchain as well.
  • Decentralisation / transaction security is reduced. If Blockchain A and Blockchain B each have 1,000 nodes validating transactions, yet the Interoperability Blockchain only has 100 nodes then you have reduced the security of the transaction from being validated by 1000 to validated by 100.
  • Security of the Interoperability Blockchain must be greater than the sum of all transactions going through it. JP Morgan transfer $6 Trillion every day, if they move that onto blockchain and need interoperability between two Permissioned blockchains that have to connect via a public Interoperability blockchain, then it would always have to be more costly to attack the blockchain than the value from stealing the funds transacted through the blockchain.
  • Imposes a lot of limitations on connected blockchains to fork their code which may mean they have to drop some existing functionality as well as prevent them from adding certain features in the future.
  • Creates a single point of failure — If the Interoperability blockchain or connector has an issue then this affects each connected blockchain.
  • It doesn’t scale and acts as a bottleneck. Not only does building complex custom connectors not scale but the Interoperability blockchain that they are forcing all transactions to go through has to be faster than the combined throughput of connected blockchains. These Interoperability blockchains have limited tps, with the most being around 200 and is a trade off between performance and decentralisation.

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.

https://preview.redd.it/yz2wvnhgxel31.png?width=1070&format=png&auto=webp&s=e6cb66e362b18e9924245a6a99e0eac4c9083308
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

https://preview.redd.it/2cwj4k7hxel31.png?width=1169&format=png&auto=webp&s=d6fc49086f944089cef7ffa1dfc9d284107ad2e3

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against?Cerf: I’m not surprised at all because we designed it to do that.This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else.We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked.And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned.We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets.We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

https://preview.redd.it/1lpt98cixel31.png?width=1126&format=png&auto=webp&s=3928cf66cfe25bfce7dc84be7b6db670ac952ccf

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert

https://preview.redd.it/1x25xg78efl31.png?width=566&format=png&auto=webp&s=abea981ff40355eed2d0e3be1ca414c5b1b8573c
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
https://twitter.com/gverdian/status/1151549142235340800
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to QuantNetwork [link] [comments]

Free Bitcoin Robot. Live Binance Crypto Trading. $BTC-Altcoins Trading Signals. CRYPTO YOUTUBERS GETTING BANNED! HUGE BITCOIN DEVELOPMENT! Python Binance Crypto Trading Bot 101 - Bitcoin Talk Crypto Podcast - Episode 1 Crypto Triangular Arbitrage in Binance With Python 3 - Live Coding Binance Bot Tutorial - Intro Python Auto Trading Software - Chapter 1 Binance Bot Update December 2018 with Binance Trade Results and Output Binance para iniciantes - veja como usar essa exchange de ...

Ini juga berarti bahwa blockchain Bitcoin sangat tahan terhadap serangan, seperti serangan 51% (atau serangan mayoritas), dan ini bukan hanya karena jaringannya yang terdesentralisasi, akan tetapi juga karena algoritma PoW tersebut. Dikarenakan biaya yang sangat mahal untuk proses penambangan, maka sangatlah sulit dan hampir tidak mungkin untuk seorang penambang untuk menginvestasikan sumber ... Projects like Binance Chain and Binance DEX are often built as forks of Bitcoin or as smart contracts on platforms like Ethereum. With a foundation of clean, well-structured code from Cosmos SDK, we were able to build on a codebase that we saw as a better alternative. Many thanks to the Cosmos developers and its community for their work (and for being really helpful in our issues and pull ... This is a library for developers. You may find a TSS tool that you can use with the Binance Chain CLI here. Introduction. This is an implementation of multi-party {t,n}-threshold ECDSA (Elliptic Curve Digital Signature Algorithm) based on Gennaro and Goldfeder CCS 2018 1 and EdDSA (Edwards-curve Digital Signature Algorithm) following a similar ... Binance discretizes their order books down to a maximum of 8 decimal places. If a symbol has a price of .000001, a tick of .00000001 is 1% of the price. If a symbol has a price of .0001, a tick of ... Der Bitcoin Trader ist eine Online-Plattform. Diese scannt die Kursverläufe und spekuliert anschließend auf dem Kryptomarkt. Anleger, welche den Bitcoin Trader nutzen wollen, müssen sich zunächst einmal auf der Plattform anmelden und anschließend einen bestimmten Betrag einzahlen, damit sie mit dem Handel beginnen können. Hallo Leute, mal wieder was neues von der ApiTrade Front. Ende Juli hatte ich die Glorreiche Idee einen weiteren Bot an dieselbe Excvhange zu koppeln wie i Are bitcoin robots scam or legit? And if so, which ones are trustworthy, and which ones should you avoid at all costs? In this guide, we list the legit bots for 2020 and explain how to sign up ... Bitcoin (BTC), Bitcoin Cash (BCH) & Bitcoin SV (BCH) (November 2018 - December 2019) 2.1 Efficient resource allocation theory. According to Binance Research, the mining allocation problem can be referred to as a problem of efficient resource allocation, from the perspective of participants in the Bitcoin mining industry: SHA-256 (ASIC) miners. Binance Academy defines staking as: ... At its core, the Proof of Stake algorithm is defined by Binance Academy as follows: “The Proof Of Stake algorithm uses a pseudo-random election process to select a node to be the validator of the next block, based on a combination of factors that could include the staking age, randomization, and the node’s wealth.” Fundamentally, “minting” a ... Today, Bitcoin core continues utilizing proof of work, a consensus algorithm that is slow, open to 51% attacks, costly to mine, harmful to the environment, and resistant to scalability. There are, however, many innovations unique to Bitcoin that require preservation, such as its 21 million token supply model and proven code-base developed by many of the world’s foremost software engineers ...

[index] [2360] [10261] [15885] [16988] [3478] [879] [8392] [5560] [5110] [15710]

Free Bitcoin Robot. Live Binance Crypto Trading. $BTC-Altcoins Trading Signals.

Live Bitcoin Trading With Crypto Trading Robot DeriBot on Deribit DeriBot Alternative channel 910 watching Live now 🔴 Bill Gates [Live] Microsoft, Bitcoin Crash, Anti-Bearish Coalition ... Binance para iniciantes - veja como usar essa exchange de Bitcoin! Tutorial 2019/2020 - Link: https://cryptotchaps.com/link/binance • Binance: https://crypto... In this video I describe recent developments to python binance crypto trading bot through a Q & A Audio recording. Check out the Cryptocurrency Technical Analysis Academy here: https://bit.ly/2EMS6nY Use the coupon code "April2020" to get $40 off of the Cryptocurrency Technical Analysis Academy! Join the First ... The algorithm is set to increase amount of bitcoins and at the first sign of danger it always tries to sell as many altcoins as possible. Our algorithm trades very carefully and all risks are ... Binance Bot Update December 2018 with Binance Trade Results and Output ... Bitcoin Halving, Dell Updates on ... Algorithmic Trading: The Basics (Part 1) - Duration: 12:42. Tudor Barb 17,209 views ... Binance Bot Tutorial, Trading Bitcoin, Ethereum and other Cryptocurrencies on the Binance Exchange. Learn How To build an algorithmic cryptocurrency trading bot with Python -

#